GL heatless regeneration adsorption drier
GL heatless regeneration adsorption drier
Use conditions and technical parameters
◆Rated inlet temperature: ≤38℃
◆Maximum inlet temperature: ≤49℃
◆Inlet oil content: ≤0.1ppm
◆Nominal pressure dew point: -40℃
◆Adsorbent: Activated aluminium oxide or molecular sieve
◆Rated working pressure: 0.6-1.0Mpa
◆Pressure loss: 0.02Mpa
◆Control mode: Microcomputer automatic control (standard configuration) PLC optional
◆Manner of working: AB tower continuously automatic shift
◆Regenerative way: Heatless regeneration
◆Regeneration gas consumption: 14%
◆Cycle period: 10min adjustable
◆Power supply: 220V/50HZ
| Model |
Handling capacity Nm3/min |
Height (mm) |
Width (mm) |
Depth (mm) |
Inlet/outlet |
Weight (kg) |
Voltage (V) |
| GL-45 | 1.29 | 1681 | 760 | 650 | DN25 | 130 | 220 |
| GL-60 | 1.72 | 1983 | 760 | 650 | DN25 | 150 | 220 |
| GL-80 | 2.3 | 2080 | 760 | 650 | DN25 | 250 | 220 |
| GL-115 | 3.3 | 2085 | 830 | 750 | DN40 | 260 | 220 |
| GL-165 | 4.7 | 2185 | 890 | 850 | DN40 | 270 | 220 |
| GL-260 | 7.4 | 2150 | 1000 | 1000 | DN40 | 360 | 220 |
| GL-370 | 11 | 2220 | 1200 | 1100 | DN50 | 460 | 220 |
| GL-450 | 13 | 2250 | 1200 | 1100 | DN50 | 600 | 220 |
| GL-590 | 17 | 2450 | 1200 | 1100 | DN65 | 1100 | 220 |
| GL-750 | 21 | 2450 | 1400 | 1100 | DN65 | 1250 | 220 |
| GL-930 | 27 | 2468 | 1400 | 1200 | DN65 | 1500 | 220 |
| GL-1130 | 32 | 2600 | 1500 | 1400 | DN80 | 1700 | 220 |
| GL-1350 | 40 | 2740 | 1650 | 1300 | DN80 | 2000 | 220 |
| GL-1550 | 45 | 2910 | 1650 | 1300 | DN100 | 2200 | 220 |
| GL-2100 | 60 | 2600 | 2100 | 1500 | DN100 | 2400 | 220 |
| GL-3000 | 86 | 2800 | 2200 | 1900 | DN150 | 3900 | 220 |
| GL-4100 | 110 | 3100 | 2400 | 1900 | DN150 | 4500 | 220 |
| GL-5600 | 155 | 3152 | 2880 | 2100 | DN150 | 5500 | 220 |
| GL-7350 | 210 | 3390 | 3000 | 2300 | DN200 | 7500 | 220 |
| GL-9100 | 260 | 3700 | 3330 | 2500 | DN250 | 8800 | 220 |
| GL-10850 | 310 | 3797 | 3670 | 2500 | DN250 | 9700 | 220 |
Pressure correction coefficient of adsorption dryer
|
Operating pressure Mpa |
4.2 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 17.6 |
| Coefficient | 0.65 | 0.75 | 0.87 | 1.00 | 1.06 | 1.12 | 1.17 | 1.22 | 1.27 | 1.32 | 1.37 | 1.41 | 1.45 | 1.50 | 1.52 |
Previous: Freezer dryer selection guide
Next: GL series micro-heating regeneration adsorption drier
