GL series low dew point combined compressed air dryer
Technical features
■Excellent design
Compact and reasonable structure.
Good quality and stability, long service life.
■Reliable control system
Standard microcomputer control can select PLC control system.
Work cycle supports on-site adjustment.
Airflow control valve is reliable.
■Easy to operate
■Use conditions and technical parameters
◆Inlet temperature: ≤45℃
◆Nominal pressure dew point: -40℃(-60℃ product optional)
◆Type of cooling: Air-cooling/Water cooling optional
◆Rated working pressure: 0.6-1.0Mpa
◆Pressure loss: 0.02Mpa
◆Control mode: Microcomputer automatic control (standard configuration) PLC optional
.jpg)
◆Regeneration gas consumption: 2-5%
◆Regenerative way: Heatless/micro-heat
◆Installation: Indoor ungrounded installation
◆Air-cooling type environmental temperature: ≤38℃
◆Water cooling type cooling water temperature: ≤32℃
◆Cooling water pressure: 0.15-0.5Mpa
▲ Air flow distributor
▲Inlet pneumatic butterfly valve
GL series low dew point combined compressed air dryer
| Model |
Air process load Nm3/min |
Power (KW) |
Type of cooling |
Cooling water consumption (T/H) |
Length (mm) |
Width (mm) |
Height (mm) |
Air outlet diameter |
Weight (kg) |
Voltage (V) |
| GL-60AD | 6.5 | 1.50 | Air-cooling | - | 1000 | 1400 | 1800 | DN40 | 580 | 220 |
| GL-80AD | 8.2 | 1.67 | Air-cooling | - | 1000 | 1400 | 1800 | DN40 | 620 | 220 |
| GL-100AD | 11 | 2.70 | Air-cooling | - | 1300 | 1700 | 2100 | DN50 | 950 | 380 |
| GL-130AD | 13 | 2.92 | Air-cooling | - | 1300 | 1700 | 2100 | DN50 | 1100 | 380 |
| GL-170AD | 17 | 3.64 | Air-cooling | - | 1360 | 1800 | 2000 | DN65 | 1550 | 380 |
| GL-210AD | 21 | 4.38 | Air-cooling | - | 1360 | 1800 | 2300 | DN80 | 1750 | 380 |
| GL-270WD | 27 | 4.61 | Water cooling | 4 | 1360 | 1800 | 2310 | DN80 | 2000 | 380 |
| GL-320WD | 32 | 5.72 | Water cooling | 5 | 1500 | 2000 | 2400 | DN100 | 2550 | 380 |
| GL-360WD | 36 | 6.08 | Water cooling | 6 | 1500 | 2000 | 2550 | DN100 | 2800 | 380 |
| GL-400WD | 40 | 7.55 | Water cooling | 7 | 1500 | 2000 | 2650 | DN100 | 2950 | 380 |
| GL-450WD | 45 | 8.30 | Water cooling | 7.5 | 1500 | 2000 | 2700 | DN100 | 3200 | 380 |
| GL-500WD | 50 | 9.02 | Water cooling | 8 | 2000 | 2500 | 2800 | DN125 | 3600 | 380 |
| GL-600WD | 60 | 11.23 | Water cooling | 10 | 2000 | 2600 | 2800 | DN125 | 3900 | 380 |
| GL-700WD | 70 | 13.96 | Water cooling | 13 | 2100 | 2600 | 2800 | DN125 | 4300 | 380 |
| GL-800WD | 80 | 14.90 | Water cooling | 15 | 2400 | 2950 | 2800 | DN150 | 5600 | 380 |
| GL-1000WD | 100 | 18.90 | Water cooling | 17 | 2500 | 3000 | 3000 | DN150 | 6500 | 380 |
| GL-1200WD | 120 | 22.07 | Water cooling | 18 | 2500 | 3000 | 3100 | DN150 | 7300 | 380 |
| GL-1550WD | 155 | 25.75 | Water cooling | 20 | 2600 | 3900 | 3100 | DN150 | 9100 | 380 |
| GL-1600WD | 160 | 29.60 | Water cooling | 23 | 2600 | 4000 | 3200 | DN150 | 9650 | 380 |
| GL-2000WD | 220 | 36.95 | Water cooling | 28 | 2900 | 4000 | 3200 | DN200 | 11600 | 380 |
Previous: GL series micro-heating regeneration adsorption drier
Next: GLYR compression heat regeneration adsorption dryer (waste heat)
